2230 High DC Programmable Power Supplies 195 W - 375 W 60 V 2230-30-3

• After-sales Service: Subject to Contract
• Warranty: Subject to Contract
• Max V / Output: up to 60 V
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 2230-30-3
• Max I / Output: up to 6 a
• Interfaces: 3 1/2 Bit 0.5 "LED
• Low Change Rate: USB, RS-232
• Channel 3 Max V and I: 5V @ 3A
• Transport Package: Waterproof and Anti-Collision
• Specification: 195 W or 375 W
• Trademark: tektronix
• Origin: America

Product Description

Product Description

 

2230-30-3, 2230-30-6, 2230-60-3 High Power,
3-Channel Programmable Power Supplies

The Series 2230 3-channel programmable power supplies provide up to 375 W of power in a space-saving 2U high, half-rack width enclosure to power automotive circuits, LED drivers, power supplies, power ICs, and other highpower circuits. The 2230-30-3 offers 195 W with two 30 V, 3 A channels and a 5 V, 3 A channel. The 2230-30-6 and the 2230-60-3 supplies output as much as 375 W. The 2230-30-6 provides two 30 V, 6 A channels, while the 2230-60-3 has two 60 V, 3 A channels. Both 375 W supplies have a 5 V, 3 A channel as the third channel. These three supplies are linear power supplies; thus, they are low noise supplies to have minimal impact on a device-under-test (DUT). Each channel has a rectangular output characteristic to enable obtaining the full current at the maximum voltage so that the 2230-30-6 can supply 30 V to a 6 A load and the 2230-60-3 can supply 60 V to a 3 A load.

Key Features
• Choose from one 195 W model and two 375 W models
• 195 W model has two 30 V, 3 A channels and one 5 V, 3 A channel
• 375 W models have two 30 V, 6 A channels or two 60 V, 3 A channels and one 5 V, 3 A channel
• All channels are independently controlled and are isolated to power a wide range of test setups
• All channels have remote sensing so the programmed voltage is accurately applied to the load
• Set and monitor output voltages with 0.03% basic accuracy and 1 mV resolution • Monitor load current with 0.1% basic accuracy and 1 mA resolution
• Low noise, linear regulation with <1 mV rms ripple and noise
• Combine channels in series to output as high as 60 V and in parallel with two or three channels to create capacity as high as 15 A (2230-30-6)
• Voltage and current outputs of three channels are displayed simultaneously for immediate observation of each output state
• USB and RS-232 interfaces and rear panel connections for automated test convenience

Model	Total Power	Channel 1 and 2 Max V	Channel 1 and 2 Max I	Channel 3 Max V and I	List Price
2230-30-3	195W	30 V	3A	5V @ 3A	US $2,160 Configure & Quote
2230-30-6	375W	30V	6A	5V @ 3A	US $2,600 Configure & Quote
2230-60-3	375W	60V	3A	5V @ 3A	US $2,600 Configure & Quote

Protection for your DUT in both manual and automated operation The Series 2230 supplies have a set of features designed to protect the DUT. Each channel has a maximum voltage setting that prevents the output voltage from being accidentally adjusted above a programmed limit. Independent outputs allow a different limit to be programmed for each output channel. Also, a userdefinable password allows the front panel to be locked to prevent any changes in parameters during testing. For unattended testing, programmable timers on each channel can turn the outputs off after a test has been completed. This ensures that a DUT that is not yet fully temperature controlled does not overheat due to the application of continuous power.

product details: