| Customization: | Available |
|---|---|
| Certification: | ISO9001, CCC, Contact Us |
| Protection: | Shock Resistance |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The MTB7671/2 instrument test box is designed to provide confirmation that your testers continue to operate properly, and maintain their accuracy and consistency between calibrations.
The NICEIC, ELECSA, and Corgi, among others, now request evidence that your testers comply with this. The MTB7671/2 checks not only the basic functions of the testers, but also that the correct test current or voltage is being used during the test. For example, a continuity test should not just give a result in ohms, but the short circuit test current should be greater than 200 mA and the open circuit voltage should be within the limits of 4 to 24 V.
The 'Pass/Fail' values are selected to ensure that, where there is a published specification for a test parameter, the MTB7671/2 will test your tester to ensure that it meets these specifications using a series of simple 'Pass/Fail' indications. Additional test values are provided to ensure that the testers maintain consistent values across the range of their operating specifications.
| Color coded testing options and clear backlit large display screen for convenience use | Two wire and three wire anti bounce testing, suitable for residual current devices (RCD) in operating systems test |
| Internal memory and Bluetooth communication | B-type RCD and three-phase RCD testing, suitable for industrial applications without grounding wires |
| Three pole, dockless grounding resistance testing technology | EN61010 CAT IV safety level and IP54 waterproof and dustproof level |
| Load current the insulation leakage current should not exceed 1mA | When the output voltage is lower than the rated load, the error is -0%+20% |
| Frequency 15 Hz~99 Hz ± 0.5% ± 1 bit 100 Hz~400 Hz ± 2.0% ± 2 bits | Short circuit current 1.5 mA rated test current |
| RCD models AC, A, S, B (pure DC) | Loop resistance test with live wire to ground/neutral wire voltage ranging from 48 V to 280 V (45 Hz to 65 Hz) |
AVANTEST ELECTRONICS established in February 2018, integrates sales, system integration, customized services, R&D, and production.The company serves as a leading solution provider in relevant industries. Its R&D department team is experienced in microwave radio frequency, communication, and semiconductor industries. All of the core technical staff hold doctoral degrees. Its products and solutions are widely used in traditional industries and emerging technological fields, including but not limited to communication, aerospace, power electronics, industrial automation, automotive electronics, rail transit, semiconductor, new energy, LED lighting, medical electronics, and electromagnetic compatibility. Its customer base comprises research institutes, testing organizations, and industrial clients.
In addition to one-stop solutions for clients, the company also acts as an authorized agent for leading domestic and international brands in product testing and measurement. including, but not limited to: Keysight, Ceyear, Rohde Schwarz, Tektronix, Agitek, Anritsu, VIAVI, Gwinstek, ActionPower, Xinertel, and others.
The product range includes but is not limited to: oscilloscopes, signal generators, spectrum analyzers, network analyzers, DC power supplies, AC power supplies, parameter analyzers, device analyzers, microwave power meters, frequency counters, noise figure testers, EMI test receivers, signal quality analyzers (high-speed bit error rate testers), wireless communication testers, protocol analyzers (PCIe, SAS/SATA, USB, etc.), safety compliance testers, digital multimeters, LCR meters, electronic loads, special power sources, network testers, network impairment emulators, and others.
Q 1: Why should we choose your company over others?
){kind=link}