Megger Mit417/2 1kv Insulation Continuity Tester Industrial/Utility Insulation Testers

• Customization: Available
• Certification: ISO9001, CCC, Contact Us
• Protection: Shock Resistance
• Model NO.: MIT417/2
• Installation: Interface USB Type B (Device)
• Housing: High Strength Aluminum Alloy/ABS
• Voltage Range: AC: 10 Mv to 600 V/DC: 0 to 600 V
• Frequency Measurement Range: 15 Hz - 400 Hz
• Range up to: 10 M
• Open Circuit Voltage: 5 V +- 1 V
• Mit400/2: 250 V, 500 V, 1000 V
• Mit410/2, 420/2,430/2: 50 V, 100 V, 250 V, 500 V, 1000 V
• Maximum Altitude: 2000 M
• IP Rating: IP 54
• Transport Package: Waterproof and Anti-Collision
• Specification: 600 g
• Trademark: Megger
• Origin: America
• Production Capacity: 5000

Product Description

Product Description

 

MIT400/2 series CAT IV insulation testers
(includes MIT410/2 MIT420/2 MIT430/2)

About the product

• Insulation testing up to 1000 V and 200 GΩ range
• Stabilized insulation test voltage (New)
• Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)
• 600 V T RMS AC and DC voltage measurement
• Live circuit detection and protection
• User variable insulation test voltage from 100V to 1000V (New) depending on model
• Test result storage and Bluetooth® downloading depending on model
• Rechargeable options for mains and car charging (New)depending on model
• CAT IV 600 V and IP54

The MIT400/2 series of CAT IV insulation and continuity testers have been designed for use in an exceptionally wide range of applications including electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics and maintenance.

The MIT400/2 series enhances insultation testing with feedback-controlled test voltages to limit overvoltage to 2 %, rather than the industry standard 10 to 20 %. Additionally, a variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application-specific test voltages are required that do not appear in the standard ranges.

Replacing the original MIT400 instruments, the new units feature a redesigned case, back stand, and 6 cell battery compartments with separate fuse access. All instruments are over-molded for increased protection and achieve an IP54 weatherproof rating. What's more, the MIT400/2 makes continuity testing significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the 'ohms' and 'kOhms' ranges. Retained are the 200 mA and 20 mA test options.

Characteristic:
 

Designed for Electrical and Industrial testing	Insulation testing up to 1000 V and 200 GΩ range
Stabilised insulation test voltage	Single range, faster continuity testing from 0.01 Ω to 1 MΩ
Adjustable insulation test voltage from 10 V to 1000 V	600 V Trms AC and DC voltage measurement
Test result storage and Bluetooth® downloading	Live circuit detection and protection
Rechargeable options for mains and car charging	CAT IV 600 V and IP54

The range consists of four instruments:

• MIT400/2: 250 V, 500 V and 1000 V
• MIT410/2: 50 V, 100 V, 250 V, 500 V and 1000 V + Polarization index, dielectric absorption ratio
• MIT420/2: 50 V, 100 V, 250 V, 500 V and 1000 V + Polarization index, dielectric absorption ratio, variable test voltage and result storage
• MIT430/2: 50 V, 100 V, 250 V, 500 V and 1000 V + Polarization index, dielectric absorption ratio, variable test voltage and Bluetooth download

Detailed Photos

 

Packaging & Shipping

 

Company Profile

AVANTEST ELECTRONICS established in February 2018, integrates sales, system integration, customized services, R&D, and production.The company serves as a leading solution provider in relevant industries. Its R&D department team is experienced in microwave radio frequency, communication, and semiconductor industries. All of the core technical staff hold doctoral degrees. Its products and solutions are widely used in traditional industries and emerging technological fields, including but not limited to communication, aerospace, power electronics, industrial automation, automotive electronics, rail transit, semiconductor, new energy, LED lighting, medical electronics, and electromagnetic compatibility. Its customer base comprises research institutes, testing organizations, and industrial clients.

In addition to one-stop solutions for clients, the company also acts as an authorized agent for leading domestic and international brands in product testing and measurement. including, but not limited to: Keysight, Ceyear, Rohde Schwarz, Tektronix, Agitek, Anritsu, VIAVI, Gwinstek, ActionPower, Xinertel, and others.

The product range includes but is not limited to: oscilloscopes, signal generators, spectrum analyzers, network analyzers, DC power supplies, AC power supplies, parameter analyzers, device analyzers, microwave power meters, frequency counters, noise figure testers, EMI test receivers, signal quality analyzers (high-speed bit error rate testers), wireless communication testers, protocol analyzers (PCIe, SAS/SATA, USB, etc.), safety compliance testers, digital multimeters, LCR meters, electronic loads, special power sources, network testers, network impairment emulators, and others.
 

FAQ

 

Q 1:  Why should we choose your company over others? 

Dear customer, thank you for your interest in Avantest and considering us as your supplier of instrumentation testing equipment.Avantest has more than ten years of experience in the field of instrumentation and testing equipment. Our team consists of a group of industry experts and senior engineers who have in-depth understanding of market demand and industry trends, and are able to provide you with the most suitable solutions.

Q2:Can you provide customized services?

We understand that each customer's needs are unique. Therefore, we provide customized products and services, designing and producing according to your specific needs. Regardless of the size of your project, we can provide you with a satisfactory solution.

Q3:Whether to provide after-sales service?

Perfect after-sales service,We value long-term partnerships with our customers, so we provide comprehensive after-sales services, including equipment installation, debugging, training, and maintenance. Our customer service team is always on standby to ensure that any issues you may encounter during use are promptly resolved.

Q 4:  Where is your company? Can I come and visit?

Our company is located in Yida Huichuang Center, Pukou Avenue, Pukou District, Nanjing City, Jiangsu Province, China.We are very much looking forward to your arrival! We are very glad to have the opportunity to meet with you, please feel free to drop by.

Q 5:  Product range ?

The product range includes but is not limited to: oscilloscopes, signal generators, spectrum analyzers, network analyzers, DC power supplies, AC power supplies, parameter analyzers, device analyzers, microwave power meters, frequency counters, noise figure testers, EMI test receivers, signal quality analyzers (high-speed bit error rate testers), wireless communication testers, protocol analyzers (PCIe, SAS/SATA, USB, etc.), safety compliance testers, digital multimeters, LCR meters, electronic loads, special power sources, network testers, network impairm.