DAQ970A / DAQ973A Data Acquisition System
Sample more signals, faster and dynamically
Highlights
Next-Generation Data Acquisition System
Get the next-generation data acquisition (DAQ) system with a three-slot mainframe and your choice of nine plug-in modules. Interface with the DAQ using Keysight BenchVue DAQ software or use the intuitive graphical front panel with task-oriented, self-guiding menus. The DAQ970A / DAQ973A data acquisition systems have high-quality switching and an advanced 6.4 digit multimeter built-in that allows you to measure accurately.
- Three-slot mainframe with built-in 6.5 digit DMM
- Nine switch and control plug-in modules
- Measures and converts 12 different input signals: temperature with thermocouples, RTDs and thermistors, dc/ac volts, 2- and 4-wire resistance, frequency and period, dc/ac current, and capacitance
- Choice of USB, LAN, or GPIB interfaces for easy connectivity to your PC
- Graphical Web interface for point and click monitor and control
- USB flash drive support to copy/log data in standalone applications
There Is No Comparison
What can you expect from a data acquisition system that is this affordable? Measurements you can trust. The powerful measurement performance, flexibility, connectivity options, cost factor, and ease-of-use of the DAQ970A / DAQ973A combine to outpace all other data acquisition systems - even in systems costing three to five times as much.
- Built-in signal conditioning
- Standard PC connectivity
- Convenient data storage with USB flash drive
- Virtual front-panel control via the BenchVue web interface
- Custom configurations that grow with you
PathWave BenchVue Data Acquisition Software
nstantly control your data acquisition units to log and visualize results in a variety of display options for easier analysis.
- Control measurement channels for your specific test configurations from multiple data acquisition units.
- Use the various waveform measurement operations in the time domain chart.
- Capture total harmonic distortion (THD), THD plus noise, and signal-to-noise and distortion (SINAD) measurement operations in a fast Fourier transform (FFT) chart.
- Create automated test sequences quickly with minimal instrument knowledge.
- Receive KeysightCare software support subscription and license with each new instrument purchase.
characteristic & What's included:
- 3-slot mainframe with USB and LAN
|
- 6 1/2-digit (22-bit) internal DMM, scanning up to 450 channels per second with new solid-state multiplexer module
|
- 9 switch and control plug-in modules to choose from
|
- 24-bit sampling rate of 800 kSa/s with a new DAQM909A 4 channel digitizer module
|
- Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance, frequency/period, diode test and capacitance
|
- 100k readings of non-volatile memory holds data when power is removed
|
- Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
|
- A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences
|
- Advanced 6½ digit internal DMM with improved accuracy and faster measurement speed
|
- Ability to measure very low current ranges (1 μA DC and 100 μA AC) and higher resistance range (1000 M)
|
- New auto-calibration that compensates for internal drifts caused by time and temperature changes
|
- 3497XA compatible, program and configuration
|
- All modules have been updated to have improved switching speeds and accuracies
|
- NEW DAQM900A solid state multiplexer with scan rate speed of up to 450 channels/sec
|
- NEW DAQM909A 24-bit digitizer module providing 4 channels, simultaneous sampling, differential inputs, and sample rates up to 800 kSa/s
|
){kind=link}